| Intended Use | For self monitoring of blood glucose |
| Method | Amperometric glucose biosensor |
| Physical Characteristic | 35-38mm(L) × 6mm(W) × 0.8mm(H) |
| Material | Base Material :PET |
| | Electrode : Carbon |
| Chemical Components | Enzyme : Glucose oxidase |
| | Mediator : Potassium ferricyanide |
| | Others : Non-reactive ingredient |
| Function | Sample Type : Capillary whole blood finger tip or AST |
| | Sample Volume : 0.7 uL |
| | Sampling Method : Capillary |
| | Reaction Time : 7 seconds |
| Performance | Linear Range : 20~600 mg/dL (1.1~33.3 mmole) |
| | Precision : <5 % with respect to control solution |
| | Accuracy : >95% fall in Zone A and B (Blood EGA test) |
| Stability | Operation : 10'C ~ 40'C , RH<85% |
| | Storage : 4'C ~ 40'C, RH<85% |
| Validity | Can Pack : 90 days from can opened , or 18 months from production date |
| | Individual Foil Pack : 18 months from production date |
| Warning : |
 Don't use expired strip |
| This strip is only used with Advocate RediCodeMeters |
Close the can immediately every time when a strip is taken
out |
| Fluoride: Cannot put fluoride into blood as the preservative |
Iodoacetic acid: It is impossible to put Iodoacetic acid into
blood as the preservative as well |
New born baby: New born baby are not recommended to
do this test |
Reductant: High density of Vitamin C or uric acid may
influence glucose value |
Hematocrit: Hematocrit above than 60% may cause lower
glucose value |
Hematocrit: Hematocrit lower than 20% may cause higher
glucose value |
